VMware Broadcom – Cosa fare ?

Broadcom's Acquisition of VMware Closed: What Now?

Broadcom ha dato una grande scossa al  2024.

Dagli ultimi rumors, sembra che il licensing della appena acquisita VMware verrà pesantemente rivisto.

Uno dei primi risultati è che molti clienti si chiedono cosa sia giusto fare.

Non ho la pretesa di conoscere la risposta corretta.

Ho effettuato alcune riflessioni che mi hanno portato a pensare a quattro futuri scenari  dei quali vi parlerò nel presente articolo.

  1. Il cliente continua la collaborazione con VMware/Broadcom.
  2. Il cliente sostituisce la tecnologia Hypervisor.
  3. Il cliente migra il proprio datacenter verso un Hyperscaler o  un Service Cloud Provider Locale.
  4. Il cliente trasforma il proprio Datacenter in un  “Datacenter as a Software”.

Per ogni scenario andrò ora a descrivere i macroscopici pro e contro.

1. Credo che il desiderato di Broadcom sia quello di semplificare il più possibile il licensing al fine di avere a portfolio soluzioni snelle e semplici da proporre.

Ciò implica eliminare alcune delle soluzioni ora presenti per concentrare le  energie unicamente su quelle a maggior rilevanza d’uso e guadagno.

Ora vi domando: Le soluzioni VMware ora presenti nel vostro datacenter sono quelle strategiche anche per Broadcom?

E ancora, siamo certi che l’ottimizzazione Broadcom non toccherà il dipartimento R&D di VMware che sviluppa le soluzioni divenute ora strategiche?

E non per ultimo, quale sarà il prezzo per poter rimanere nell’ecosistema Broadcom-VMware?

2. La prima sfida è quella di fornirsi di strumenti in grado di migrare le VM da una tecnologia HyperVisor all’altra.

La seconda è quella di proteggerle.

(NDR. Meno male che Veeam Backup & Replication permette di realizzare con un solo strumento entrambe le cose 🙂 )

Aggiungo, che bisognerà essere anche fortunati nello scegliere un vendor che non sia nel mirino di una nuova Broadcom, perché finire nello stesso giro dantesco sarebbe diabolico.

Pensare ad una tecnologia open-source based?

3. Il modello degli Hyper-Scaler è quello di fornire una serie di servizi  personalizzabili.

Spesso sento qualcuno affermare che esistano dei “costi nascosti”.  Non è vero, sono tutti ben illustrati, solo che capirli preventivamente è spesso molto difficile.

Avrà quindi particolare importanza la fase di creazione del progetto di migrazione che dovrà essere particolarmente accurata al fine di non ritrovarsi brutte sorprese  a fine mese .

4. Data Center as a Software è sinonimo di un’architettura Cloud Native.

Ciò implica riscrivere applicazioni e servizi in modo tale che siano  indipendenti dal HyperVisor.

E’ il nuovo approccio che negli anni diventerà un comune standard per scrivere codice.

Nel sito troverete una serie di articoli sul mondo Container e kubernetes ai quali vi rimando.

Tante domande, una sola risposta giusta?

No, credo che la migliore strategia sia quella di ricercare il miglior bilanciamento nell’utilizzo delle diverse opzioni disponibili, per arrivare a regime con la soluzione che si adatta al meglio alle necessità della vostra azienda in un corretto bilanciamento tra costi e benefici.

Ultima nota: Non dimenticate mai di aggiungere dei piani di formazione del personale perchè il training on the job in scenari particolarmente complessi NON è mai la via migliore per rendere sicuri i vostri sistemi ovunque questi siano

Kubernetes: The components

In previous articles we have seen some details of how the Kubernetes architecture is built.

Today the working mechanisms of the Kubernetes engine will be described indicating the name of each component; to remain faithful to the comparison of the car engine, we will speak of the camshafts, valves, bearings, … that belong to the Cloud Native

Note 1: The installation of k8s in Datacenter, Cloud, and Laboratory will not be discussed, the network has already made comprehensive tutorials available.

To familiarize yourself with k8s I recommend using Minikube (Linux platform) Docker Desktop (Windows & Mac platform).

Let’s begin!

Kubernetes Master:It is the main node of the cluster on which three processes that are vital for the existence of the cluster run.

  • kube-apiserver
  • kube-controller-manager
  • Kube-scheduler

In the master node, there is also the DataBase etcd, which stores all configurations created in the cluster.

The nodes that take care of running the applications and therefore the services are said worker node. The processes present on the worker node I’m:

  • Kubelet
  • kube-proxy

kubectl : AND’ The official Kubernetes client ( CLI ) through which you can manage the cluster ( Kube-apiserver ) using the API.

Some simple examples of kubectl commands are:

  • kubectl version (indicates the version of k8s installed)
  • kubectl get nodes (find out the number of nodes in the cluster)
  • kubectl describe nodes nodes-1 (shows the health status of the node, the platform on which k8s is running (Google, AWS, ….) and the allocated resources (CPU, RAM)).

Kube-Proxy : He is responsible for managing networking, from Routing to Load Balancing rules.

Note 2 : K8s will try to use them all libraries available at the level of operating system .

Container Runtime : It is the foundation on which the k8s technology rests.

kubernetes supports several runtimes among which we remember, container-d , cri-o , rktlet .

Note 3 : The runtime Docker it has been deprecated in favor of those that use interfaces CRI ; Docker images will still continue to work in the cluster.

The objects Kubernetes base are:

  • Pod
  • Services
  • Volumes
  • Namespace

THE controller provide additional functionality and are:

  • ReplicaSet
  • Deployment
  • StatefulSet
  • DaemonSet
  • Job

Between Deployment it is imperative to mention Kube-DNS which provides name resolution services. Since kubernetes version 1.2 the name has changed to Core-dns.

Add-On : they are used to configure further cluster functions and are placed inside the name space kube-system (such as Kube-Proxy, Kube-DNS, kube-Dashboard)

Add-ons are categorized according to their use:

  • Add-on of Netwok policy . (For example the NSX-T add-on takes care of the communication between the K8s environment and VMware)
  • Add-on Infrastructural (For example KubeVirt which allows connection with virtual architectures)
  • Add-on of Visualization and Control (For example Dashboard a web interface for K8s).

For commissioning, Add-ons use controllers DaemonSet And Deployment .

The image in figure 1 summarizes what has just been explained.

Figure 1

Take care and see you soon.

Kubernets: Know the details

A good way to describe cloud-native environments is to refer to the image of your car.

The container is the engine, k8s is the electronic control unit that manages the proper functioning of the vehicle, the drivers, indicating the route and the destination, select the type of service to be provided.

Today’s article will reveal some architectural details to understand how “the car” manages to reach its destination in an efficient way.

Containers are of two types:

The first is called System Container. It is the bodywork of the car (I mean from the plates to seats, steering wheel, gear lever and accessories).

Often for simplicity of creation, it is a Virtual Machine (VM) with Linux operating system (it can also be Windows).

The most common services present in the VM are ssh , cron and syslog , the File System is of type ext3, ext4, etc.

The second type is called Application Container and is the place where the image will carry out the activities.

Note1: The image is not a single large file. They are usually multiple files which, through an internal cross-pointing system, allow the application to operate correctly.

The Container application (from now on container only), has an operating mode based on a rigid logic, where all levels (layers) have the peculiarity of communicating with each other and are interdependent.

Figure 1

This approach is very useful as it is able to manage the changes that may occur over time in an effective and hierarchical way.

Let’s take an example: When a service configuration change occurs, for which Layer C is updated, Layer A and B are not affected, which means that they must NOT be modified in turn.

Since Developers like to refine their own images (program files) rather than dependencies, it makes sense to set the service logic in the mode indicated in figure 2 where the dependencies are not affected by a new image.

Figure 2

Note2 : The File system on which the images are placed (in the example of the car engine we are talking about pistons, connecting rods, shafts …) is mainly of three different types:

  • Overlay
  • Overlay 2
  • AUFS

Note3 : A good advice on the security side is not to build the architecture so that the passwords are contained in the images ( Baked in – Cooked)

One of the splendid innovations introduced in the container world is the management of images:

In a classic high-reliability environment, the application is installed on every single node of the cluster.

In containers, the application is downloaded and deployed only when the workload requires more resources than a new cluster node with a new image.

For this reason, the images are saved in “virtual” warehouses, which can be local or distributed on the internet. They are called “Register Server”.

The most famous are Docker Hub, Google Container Registry, Amazon Elastic Container Registry, Azure Container Registry.

We conclude this article by talking about the management of resources associated with a service.

The container platform uses two features called Cgroup and NameSpace to allocate resources that work at the kernel level.

The purpose of the Cgroup is to assign the correct resources ( CPU & RAM ).

Name spaces have the purpose of grouping the different processes and making sure that they are isolated from each other ( Multitenancy ).

The type of NameSpace can affect all the components of the service as indicated in the list below.

  • Cgroup
  • PID
  • Users
  • Mount
  • Network
  • IPC (Interprocess communication)
  • UTS (allows a single system to appear with different host and domain names and with different processes, useful in case of migration)

An example of limiting the resources of an application is shown in Figure 3 where thegable image, downloaded from the Register Server grcgp, has a limit of RAM and CPU resources allocated.

Figure 3

Soon

Cloud Native Kubernetes: Flow and Job Opportunities

This new article aims to indicate the new job opportunities created by a cloud-native environment.

Image n ° 1 shows the four main levels required by the architecture to function correctly ( left rectangular part).

On the right side ( circles ) are represented the occupations of the operator with respect to every single level.

Picture 1

Bottom up:

1- Storage and Network Operators ( SNOs ) are responsible for managing the hardware architecture.

Role activity number may decrease if deployed in a public cloud or IaaS (Infrastructure as a Service)

2- The Operating System Operator ( OSO ) works at the level of the operating system where the k8s service is running.

The OSO needs expertise in Linux and Windows . Skills in virtualization architecture such as VMware , RedHat , Nutanix , etc. are often required.

If the architecture has been leased from the public cloud or in an IaaS in general, the skills must cover this new architecture.

3- The orchestrator operator (OO) works with the core of the cloud-native administration environment. This world needs a lot of new skills.

Automation is the child of orchestration.

The main concept is that the OO should have sufficient skills to be able to follow all the processes of “Continuous Integration” and “Continuous Delivery” (often called CI / CD ).

Image 2 gives an idea about it

The central arrows show the flow to allow the delivery of a service.

For every single arrow, there are new tools to know to manage the entire release of the service.

Just a few examples: to test the environment you can work with cucumber or Cypress.io, for distribution and construction you can use Jenkins … and so on …

Image 2

Note 1 There are so many platforms available that choosing the right one can be very challenging

4- The development operator is the role of the people who are writing lines of code. They often use software to run businesses like Jira Core and Trello.

Note 2: In my personal opinion, the vendor who creates a software layer capable of centrally managing all these 6 core activities will have a competitive advantage over their competitors.

The big vendors are already playing: RedHat is working from the beginning with its platform ( OpenStack ), VMware has released Tanzu, Nutanix with Carbonite and Microsoft will play its role with the new version of Windows 2022 .

The only good suggestion I can give you is to study this new and fantastic world.

See you soon and take care of yourself